Info: 'Memory Error detected by SmartHeap Library.'
DITL_29877.txt
Items: (4 entries)
0:
Bounds: x1=47, y1=52, x2=359, y2=78
Type: 8
Info: 'Error Code ^0.'
1:
Bounds: x1=202, y1=91, x2=273, y2=112
Type: 4
Info: 'Quit'
2:
Bounds: x1=288, y1=91, x2=359, y2=112
Type: 4
Info: 'Ignore'
3:
Bounds: x1=47, y1=17, x2=359, y2=51
Type: -120
Info: 'Memory Error detected by SmartHeap Library.'
DITL_9204_OK Save.txt
Items: (4 entries)
0:
Bounds: x1=23, y1=70, x2=96, y2=90
Type: 4
Info: 'Yes'
1:
Bounds: x1=23, y1=102, x2=96, y2=122
Type: 4
Info: 'No'
2:
Bounds: x1=177, y1=102, x2=250, y2=122
Type: 4
Info: 'Cancel'
3:
Bounds: x1=65, y1=5, x2=261, y2=65
Type: -120
Info: 'Save changes to ^0 type before closing?'
DITL_6110.txt
Items: (3 entries)
0:
Bounds: x1=77, y1=77, x2=135, y2=97
Type: 4
Info: 'Yes'
1:
Bounds: x1=216, y1=77, x2=274, y2=97
Type: 4
Info: 'No'
2:
Bounds: x1=42, y1=11, x2=288, y2=53
Type: -120
Info: 'Memory is getting low . Do you wishto continue with this operation? '
DITL_6035_External Port Interface.txt
Items: (2 entries)
0:
Bounds: x1=46, y1=14, x2=220, y2=31
Type: -120
Info: 'Making port interface for'
1:
Bounds: x1=66, y1=32, x2=197, y2=48
Type: -120
Info: 'external subcircuit.'
DITL_6034_Internal Port Interface.txt
Items: (2 entries)
0:
Bounds: x1=46, y1=14, x2=220, y2=31
Type: -120
Info: 'Making port interface for'
1:
Bounds: x1=66, y1=32, x2=197, y2=48
Type: -120
Info: 'internal subcircuit.'
DITL_6033_Failed to open interface cct.txt
Items: (2 entries)
0:
Bounds: x1=162, y1=111, x2=240, y2=131
Type: 4
Info: 'Continue'
1:
Bounds: x1=71, y1=4, x2=372, y2=103
Type: -120
Info: 'Failed to make a port interface for the part's internal/external subcircuit. Without a port interface the "DevEditor" will be unable to automatically check that pins match ports in the subcircuit. These check must then be done manually.'
DITL_6032_All Ports not covered.txt
Items: (4 entries)
0:
Bounds: x1=29, y1=102, x2=172, y2=122
Type: 4
Info: 'Uncovered Ports OK'
1:
Bounds: x1=217, y1=102, x2=275, y2=122
Type: 4
Info: 'Cancel'
2:
Bounds: x1=71, y1=8, x2=297, y2=40
Type: -120
Info: 'The port(s) listed below were not covered by a pin.'
3:
Bounds: x1=3, y1=53, x2=300, y2=97
Type: -120
Info: '^0'
DITL_6031_Deleting Ports Warning.txt
Items: (3 entries)
0:
Bounds: x1=120, y1=74, x2=214, y2=94
Type: 4
Info: 'Delete Ports'
1:
Bounds: x1=254, y1=74, x2=312, y2=94
Type: 4
Info: 'Cancel'
2:
Bounds: x1=71, y1=1, x2=361, y2=65
Type: -120
Info: 'One or more of the pins selected are associated with circuit ports. Deleting the pins will require that "Part Type..." be used to reassociate the ports in the future.'
DITL_6030_Cant Get DRVR Resource.txt
Items: (4 entries)
0:
Bounds: x1=227, y1=56, x2=285, y2=76
Type: 4
Info: 'OK'
1:
Bounds: x1=72, y1=6, x2=315, y2=39
Type: -120
Info: 'Unable to read 'DRVR' resource from specified file.'
2:
Bounds: x1=23, y1=58, x2=120, y2=74
Type: -120
Info: 'Error Number:'
3:
Bounds: x1=119, y1=58, x2=208, y2=74
Type: -120
Info: '^0'
DITL_6029_Open Int.txt
Items: (6 entries)
0:
Bounds: x1=213, y1=89, x2=277, y2=109
Type: 4
Info: 'Internal'
1:
Bounds: x1=213, y1=115, x2=277, y2=135
Type: 4
Info: 'Cancel'
2:
Bounds: x1=213, y1=89, x2=277, y2=109
Type: -128
Info: ''
3:
Bounds: x1=6, y1=22, x2=199, y2=141
Type: 0
Info: ''
4:
Bounds: x1=15, y1=3, x2=188, y2=20
Type: -120
Info: 'Select an Internal Circuit:'
5:
Bounds: x1=35, y1=201, x2=200, y2=220
Type: -120
Info: ''
DITL_6028.txt
Items: (2 entries)
0:
Bounds: x1=143, y1=64, x2=201, y2=84
Type: 4
Info: 'OK'
1:
Bounds: x1=70, y1=1, x2=328, y2=51
Type: -120
Info: 'Unable to open a part. A part must be selected in the parts palette before it can be opened.'
DITL_6027.txt
Items: (3 entries)
0:
Bounds: x1=271, y1=83, x2=329, y2=103
Type: 4
Info: 'OK'
1:
Bounds: x1=109, y1=3, x2=335, y2=70
Type: -120
Info: 'The part being edited has become disassociated from its original library or the part name changed in the library. '
2:
Bounds: x1=3, y1=75, x2=254, y2=110
Type: -120
Info: 'Please use "Save Part As" to indicate the correct library and part name.'
DITL_6026.txt
Items: (3 entries)
0:
Bounds: x1=73, y1=82, x2=131, y2=102
Type: 4
Info: 'OK'
1:
Bounds: x1=176, y1=82, x2=234, y2=102
Type: 4
Info: 'Cancel'
2:
Bounds: x1=73, y1=2, x2=316, y2=70
Type: -120
Info: 'A part with the same name already exists in the library. Continuing will replace original part with the saved part.'
DITL_6025.txt
Items: (2 entries)
0:
Bounds: x1=264, y1=64, x2=322, y2=84
Type: 4
Info: 'OK'
1:
Bounds: x1=75, y1=4, x2=322, y2=55
Type: -120
Info: 'An internal bus pin was not extacted because it did not follow a bus pin in the pin list.'
DITL_6024_PrimType New.txt
Items: (19 entries)
0:
Bounds: x1=1, y1=1, x2=197, y2=17
Type: -120
Info: 'Subcircuit Configurations:'
1:
Bounds: x1=15, y1=18, x2=280, y2=34
Type: 6
Info: 'No Subcircuit.'
2:
Bounds: x1=15, y1=36, x2=280, y2=52
Type: 6
Info: 'Imported Port Definition Only...'
3:
Bounds: x1=15, y1=54, x2=280, y2=72
Type: 6
Info: 'Internal Subcircuit...'
4:
Bounds: x1=15, y1=74, x2=280, y2=90
Type: 6
Info: 'External Subcircuit...'
5:
Bounds: x1=15, y1=92, x2=280, y2=108
Type: 6
Info: 'Symbol Only, never has subcircuit.'
6:
Bounds: x1=15, y1=110, x2=280, y2=126
Type: 6
Info: 'Behavioral MEDA Module...'
7:
Bounds: x1=15, y1=128, x2=280, y2=144
Type: 6
Info: 'Primitive, use caution.'
8:
Bounds: x1=32, y1=146, x2=180, y2=166
Type: 0
Info: ''
9:
Bounds: x1=1, y1=168, x2=197, y2=184
Type: -120
Info: 'Subcircuit Options:'
10:
Bounds: x1=15, y1=184, x2=280, y2=200
Type: 5
Info: 'Delete old pins before merging ports.'
11:
Bounds: x1=15, y1=201, x2=280, y2=217
Type: 5
Info: 'Do not allow subcircuit to be opened.'
12:
Bounds: x1=5, y1=252, x2=224, y2=300
Type: -64
Info: '{'
13:
Bounds: x1=10, y1=258, x2=219, y2=294
Type: -120
Info: ''
14:
Bounds: x1=233, y1=254, x2=283, y2=274
Type: 4
Info: 'Done'
15:
Bounds: x1=233, y1=281, x2=283, y2=301
Type: 4
Info: 'Cancel'
16:
Bounds: x1=233, y1=254, x2=283, y2=274
Type: -128
Info: ''
17:
Bounds: x1=15, y1=218, x2=280, y2=234
Type: 5
Info: 'Do not package subcircuit.'
18:
Bounds: x1=15, y1=234, x2=280, y2=250
Type: 5
Info: 'Do not report subcircuit.'
DITL_6023.txt
Items: (3 entries)
0:
Bounds: x1=94, y1=55, x2=152, y2=75
Type: 4
Info: 'Delete'
1:
Bounds: x1=228, y1=55, x2=286, y2=75
Type: 4
Info: 'Cancel'
2:
Bounds: x1=64, y1=9, x2=333, y2=43
Type: -120
Info: 'Selected pin(s) will be deleted from list. This operation can not be undone.'
DITL_6016.txt
Items: (2 entries)
0:
Bounds: x1=138, y1=53, x2=196, y2=73
Type: 4
Info: 'OK'
1:
Bounds: x1=69, y1=9, x2=327, y2=44
Type: -120
Info: 'Duplicate pin names were found. Pin names must be unique.'
DITL_6015.txt
Items: (3 entries)
0:
Bounds: x1=51, y1=73, x2=126, y2=93
Type: 4
Info: 'Continue'
1:
Bounds: x1=241, y1=73, x2=299, y2=93
Type: 4
Info: 'Abort'
2:
Bounds: x1=63, y1=8, x2=335, y2=61
Type: -120
Info: 'Exhausted pin numbers before last pin was given a number. The first pin not assigned a pin number is ^0.'
DITL_6014.txt
Items: (3 entries)
0:
Bounds: x1=30, y1=71, x2=105, y2=91
Type: 4
Info: 'Continue'
1:
Bounds: x1=220, y1=71, x2=278, y2=91
Type: 4
Info: 'Abort'
2:
Bounds: x1=84, y1=8, x2=302, y2=58
Type: -120
Info: 'Exhausted pin list. There was no associated pin to assign the pin number ^0 to.'
DITL_6013.txt
Items: (3 entries)
0:
Bounds: x1=30, y1=71, x2=105, y2=91
Type: 4
Info: 'Continue'
1:
Bounds: x1=220, y1=71, x2=278, y2=91
Type: 4
Info: 'Abort'
2:
Bounds: x1=84, y1=8, x2=302, y2=58
Type: -120
Info: 'There are more pin numbers in the range ^0..^1 then there were pins.'
DITL_6012_Add Pins.txt
Items: (5 entries)
0:
Bounds: x1=40, y1=6, x2=301, y2=36
Type: -112
Info: ''
1:
Bounds: x1=313, y1=13, x2=353, y2=31
Type: 4
Info: 'Add'
2:
Bounds: x1=313, y1=13, x2=353, y2=31
Type: -128
Info: ''
3:
Bounds: x1=2, y1=4, x2=36, y2=36
Type: -120
Info: 'AddPins:'
4:
Bounds: x1=2, y1=1, x2=2, y2=1
Type: -128
Info: ''
DITL_6008_Type Delay.txt
Items: (6 entries)
0:
Bounds: x1=122, y1=41, x2=182, y2=61
Type: 4
Info: 'OK'
1:
Bounds: x1=8, y1=41, x2=68, y2=61
Type: 4
Info: 'Cancel'
2:
Bounds: x1=129, y1=7, x2=171, y2=23
Type: 16
Info: ''
3:
Bounds: x1=14, y1=7, x2=124, y2=24
Type: -120
Info: 'Primitive Type:'
4:
Bounds: x1=223, y1=23, x2=239, y2=32
Type: -120
Info: ''
5:
Bounds: x1=122, y1=41, x2=182, y2=61
Type: -128
Info: ''
DITL_6007_Type Delay.txt
Items: (6 entries)
0:
Bounds: x1=8, y1=31, x2=68, y2=51
Type: 4
Info: 'OK'
1:
Bounds: x1=122, y1=31, x2=182, y2=51
Type: 4
Info: 'Cancel'
2:
Bounds: x1=129, y1=7, x2=171, y2=23
Type: 16
Info: ''
3:
Bounds: x1=14, y1=7, x2=124, y2=24
Type: -120
Info: 'New Part Delay:'
4:
Bounds: x1=223, y1=23, x2=239, y2=32
Type: -120
Info: ''
5:
Bounds: x1=8, y1=31, x2=68, y2=51
Type: -128
Info: ''
DITL_6006_Save As.txt
Items: (8 entries)
0:
Bounds: x1=225, y1=91, x2=285, y2=111
Type: 4
Info: 'Save As'
1:
Bounds: x1=226, y1=121, x2=286, y2=141
Type: 4
Info: 'Cancel'
2:
Bounds: x1=9, y1=169, x2=215, y2=185
Type: 16
Info: ''
3:
Bounds: x1=6, y1=148, x2=95, y2=164
Type: -120
Info: 'Save Part As:'
4:
Bounds: x1=35, y1=201, x2=200, y2=220
Type: -120
Info: ''
5:
Bounds: x1=225, y1=91, x2=285, y2=111
Type: -128
Info: ''
6:
Bounds: x1=6, y1=22, x2=199, y2=137
Type: 0
Info: ''
7:
Bounds: x1=6, y1=3, x2=157, y2=21
Type: -120
Info: 'Select an open library:'
DITL_6003_Preferences.txt
Items: (14 entries)
0:
Bounds: x1=38, y1=135, x2=98, y2=155
Type: 4
Info: 'Set'
1:
Bounds: x1=180, y1=135, x2=240, y2=155
Type: 4
Info: 'Cancel'
2:
Bounds: x1=40, y1=1, x2=138, y2=21
Type: 5
Info: 'Display Grid'
3:
Bounds: x1=162, y1=1, x2=243, y2=21
Type: 5
Info: 'Snap On'
4:
Bounds: x1=123, y1=42, x2=173, y2=57
Type: 16
Info: ''
5:
Bounds: x1=123, y1=72, x2=173, y2=87
Type: 16
Info: ''
6:
Bounds: x1=123, y1=102, x2=173, y2=117
Type: 16
Info: ''
7:
Bounds: x1=6, y1=39, x2=91, y2=59
Type: -120
Info: 'Grid Spacing'
8:
Bounds: x1=5, y1=70, x2=94, y2=90
Type: -120
Info: 'Snap Spacing'
9:
Bounds: x1=178, y1=39, x2=275, y2=60
Type: -120
Info: 'in screen dots'
10:
Bounds: x1=178, y1=69, x2=274, y2=90
Type: -120
Info: 'in screen dots'
11:
Bounds: x1=5, y1=100, x2=117, y2=119
Type: -120
Info: 'Pin Snap Spacing'
12:
Bounds: x1=178, y1=99, x2=274, y2=120
Type: -120
Info: 'in screen dots'
13:
Bounds: x1=38, y1=135, x2=98, y2=155
Type: -128
Info: ''
DITL_6002_AutoSym.txt
Items: (18 entries)
0:
Bounds: x1=313, y1=216, x2=386, y2=234
Type: 4
Info: 'Generate'
1:
Bounds: x1=313, y1=243, x2=386, y2=261
Type: 4
Info: 'Cancel'
2:
Bounds: x1=1, y1=1, x2=146, y2=30
Type: -64
Info: 'Ù'
3:
Bounds: x1=6, y1=178, x2=140, y2=286
Type: -64
Info: 'q'
4:
Bounds: x1=18, y1=31, x2=123, y2=44
Type: -120
Info: 'Left Pin Names'
5:
Bounds: x1=161, y1=2, x2=259, y2=18
Type: -120
Info: 'Top Pin Names'
6:
Bounds: x1=163, y1=124, x2=255, y2=140
Type: -120
Info: 'Symbol Name'
7:
Bounds: x1=149, y1=164, x2=271, y2=177
Type: -120
Info: 'Bottom Pin Names'
8:
Bounds: x1=294, y1=30, x2=403, y2=45
Type: -120
Info: 'Right Pin Names'
9:
Bounds: x1=150, y1=143, x2=270, y2=159
Type: 16
Info: ''
10:
Bounds: x1=11, y1=48, x2=134, y2=173
Type: 16
Info: ''
11:
Bounds: x1=150, y1=19, x2=269, y2=119
Type: 16
Info: ''
12:
Bounds: x1=289, y1=49, x2=409, y2=205
Type: 16
Info: ''
13:
Bounds: x1=150, y1=181, x2=270, y2=282
Type: 16
Info: ''
14:
Bounds: x1=1435, y1=0, x2=1534, y2=22
Type: -64
Info: 'ó'
15:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: -128
Info: ''
16:
Bounds: x1=313, y1=216, x2=386, y2=234
Type: -128
Info: ''
17:
Bounds: x1=294, y1=267, x2=406, y2=285
Type: 4
Info: 'Extract Pin List'
DITL_6001_Pin Info.txt
Items: (23 entries)
0:
Bounds: x1=4, y1=5, x2=70, y2=21
Type: -120
Info: 'Pin Name:'
1:
Bounds: x1=14, y1=28, x2=70, y2=43
Type: -120
Info: 'Number:'
2:
Bounds: x1=9, y1=67, x2=99, y2=86
Type: -128
Info: ''
3:
Bounds: x1=74, y1=5, x2=240, y2=21
Type: 16
Info: ''
4:
Bounds: x1=74, y1=28, x2=116, y2=43
Type: 16
Info: ''
5:
Bounds: x1=4, y1=47, x2=71, y2=65
Type: 6
Info: 'Normal'
6:
Bounds: x1=81, y1=47, x2=125, y2=65
Type: 6
Info: 'Bus'
7:
Bounds: x1=135, y1=47, x2=236, y2=65
Type: 6
Info: 'Bus Internal'
8:
Bounds: x1=102, y1=67, x2=219, y2=86
Type: 0
Info: ''
9:
Bounds: x1=183, y1=95, x2=242, y2=111
Type: 4
Info: 'Top'
10:
Bounds: x1=183, y1=119, x2=242, y2=135
Type: 4
Info: 'Bottom'
11:
Bounds: x1=61, y1=95, x2=120, y2=111
Type: 4
Info: 'Promote'
12:
Bounds: x1=61, y1=119, x2=120, y2=135
Type: 4
Info: 'Demote'
13:
Bounds: x1=122, y1=119, x2=181, y2=135
Type: 4
Info: 'Delete'
14:
Bounds: x1=122, y1=27, x2=170, y2=45
Type: 5
Info: 'Port'
15:
Bounds: x1=59, y1=90, x2=243, y2=91
Type: -64
Info: '|'
16:
Bounds: x1=2, y1=-1, x2=2, y2=-1
Type: -128
Info: ''
17:
Bounds: x1=122, y1=95, x2=181, y2=111
Type: 4
Info: 'Collect'
18:
Bounds: x1=67, y1=208, x2=142, y2=224
Type: 16
Info: ''
19:
Bounds: x1=172, y1=27, x2=235, y2=45
Type: 5
Info: 'Placed'
20:
Bounds: x1=3, y1=93, x2=57, y2=109
Type: -120
Info: 'Length:'
21:
Bounds: x1=6, y1=114, x2=53, y2=130
Type: 16
Info: ''
22:
Bounds: x1=58, y1=90, x2=59, y2=136
Type: -64
Info: '}'
DITL_6000_Internal Crct.txt
Items: (6 entries)
0:
Bounds: x1=226, y1=69, x2=300, y2=89
Type: 4
Info: 'Internal'
1:
Bounds: x1=225, y1=136, x2=300, y2=156
Type: 4
Info: 'Cancel'
2:
Bounds: x1=15, y1=43, x2=185, y2=169
Type: 0
Info: ''
3:
Bounds: x1=225, y1=102, x2=300, y2=122
Type: 4
Info: 'No Circuit'
4:
Bounds: x1=13, y1=9, x2=314, y2=28
Type: -120
Info: 'Select a new internal circuit for the type...'
